I used a Cath Kidston pattern which I found on the internet here. To be honest, it's a bit hard to follow and it didn't have a scale, but I muddled through. I made my oven glove 70cm long, with the hand pockets 20cm long each and I made the whole thing 20cm wide. Using those measurements, I got away with 0.25m of each of the exterior fabrics (note - cut as a strip rather than as a fat quarter). I also used 0.25m of wool batting, 0.25m of some special heat reflective stuff (not sure exactly what it's called, but just ask at your local fabric store - I don't stock it sorry!), and about 2m of 25mm wide bias binding. The Cath Kidston pattern doesn't call for the heat reflective stuff, but I'd definitely recommend it because there's nothing worse than burning yourself on hot dishes. If you wanted to do that you wouldn't bother to wear an oven mitt now would you?!
Now, it all seemed straight forward enough, but never having worked with bias binding before (should I be admitting that?) I did find this somewhat challenging. Firstly I bought the wrong sized bias binding and had to go back and get some more as the smaller stuff just wouldn't fit over all the layers. Then, because of all the layers my machine had a bit of a hissy fit and kept choking on the bobbin. And then, to top it all off, I struggled with the very act of sewing the bias binding on using a nice straight topstitch, so it's a bit all over the place. Oh well, despite the end product being less perfect than I usually accept, it's turned out ok and will be functional enough. And, since Nana is nearly blind I don't think she'll be inspecting it for its imperfections! Thank goodness!
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.